Troubleshooting: Why's My Infrared Outdoor Heater Not Blowing Hot Air?

Infrared Outdoor Heater Not Blowing Hot Air? Let's Dive In!

Is your infrared heater not blowing hot air? Don't panic! We understand how frustrating it can be to rely on a heater that fails to keep you warm during those chilly winter months. Luckily, we've got you covered with some handy troubleshooting tips to help get your infrared heater back up and running.

In this article, we will uncover common reasons why your infrared heater might not be blowing hot air and provide effective solutions to resolve the issue. From simple DIY fixes to potential equipment malfunctions, we'll guide you step by step to ensure that you regain the cozy warmth you're longing for.

Whether you're dealing with a faulty heating element, an obstruction in the air intake, or a malfunctioning thermostat, our troubleshooting tips will address potential causes and offer practical solutions to get your infrared heater back on track.

Don't shiver in the cold any longer! Join us as we delve into the world of infrared heaters and equip you with the knowledge to troubleshoot and resolve the hot air woes of your infrared heater.

How Infrared Patio Heaters Work

Before we dive into common causes of an infrared heater not blowing hot air, let's take a quick look at how these heaters work.

Infrared heaters work by emitting infrared radiation that heats up objects in the room, rather than heating up the air itself. The heat is absorbed by the objects in the room, and then radiated back into the air, creating a cycle of warmth.

This makes infrared heaters a more energy-efficient option than traditional heaters, as they don't need to heat up an entire room to maintain a comfortable temperature. However, this also means that they may take longer to warm up a room, and may not feel as warm to the touch as other heaters.

Now that we've covered the basics of how infrared heaters work, let's move on to common reasons why your infrared heater may not be blowing hot air.

Common reasons why an infrared heater may not blow hot air

One common reason why an infrared heater may not be blowing hot air is due to an insufficient power supply. If the heater is not receiving enough power, it may not be able to generate enough heat to warm up the room.

To troubleshoot this issue, first, make sure that your heater is plugged into a functioning outlet. If you're using an extension cord, try plugging the heater directly into the wall to see if that makes a difference.

If the heater is still not blowing hot air, check to see if the circuit breaker has tripped. If it has, try resetting the circuit breaker and see if that resolves the issue.

If none of these steps work, it's possible that the heater may be drawing too much power for your electrical system to handle. In this case, you may need to consult an electrician to upgrade your electrical system.

Insufficient power supply

Another common reason why an infrared heater may not be blowing hot air is due to a malfunctioning thermostat. The thermostat controls the temperature of the heater, and if it's not functioning properly, it may not be able to regulate the heat output.

To troubleshoot this issue, first, check the thermostat settings to make sure that they're set correctly. If the thermostat is set to a low temperature, it may not be blowing hot air because it's not reaching the desired temperature.

If the thermostat settings are correct, try resetting the thermostat to see if that resolves the issue. If the thermostat still isn't functioning properly, it may need to be replaced.

Malfunctioning thermostat

Blocked or dirty heating elements can also cause an infrared heater to not blow hot air. Over time, dust and debris can build up on the heating elements, blocking the flow of heat.

To troubleshoot this issue, first, turn off the heater and unplug it from the wall. Then, carefully remove the front grill and check the heating elements for any visible blockages or dirt.

If you see any blockages or dirt, use a soft brush or cloth to gently clean the heating elements. Be careful not to bend or damage the elements while cleaning.

Once the heating elements are clean, replace the front grill and plug the heater back in to see if it's blowing hot air.

Blocked or dirty heating elements

sunpak patio heaters
Featured Infrared Heater: Sunpak Two Stage Infrared Patio Heater Electric Ignition - S34 TSH

If the heating elements are clean and the thermostat is functioning properly, but the infrared heater is still not blowing hot air, it may be due to issues with the fan or air flow.

To troubleshoot this issue, first, check the fan to make sure that it's functioning properly. If the fan is not spinning or is making strange noises, it may need to be replaced.

If the fan is functioning properly, check the air intake and exhaust ports for any blockages. If there are blockages, use a soft brush or cloth to gently clean the ports.

If the air intake and exhaust ports are clean and the fan is functioning properly, it's possible that there may be an issue with the internal components of the heater. In this case, it may need to be serviced by a professional technician.

Issues with the fan or air flow

Finally, if none of the above troubleshooting steps have resolved the issue, it's possible that there may be a problem with the heating element itself. Over time, heating elements can become damaged or worn out, leading to a lack of heat output.

To troubleshoot this issue, first, turn off the heater and unplug it from the wall. Then, carefully remove the front grill and check the heating element for any signs of damage or wear.

If the heating element is damaged or worn out, it will need to be replaced. Contact the manufacturer or a professional technician to replace the heating element.

Problems with the heating element itself

1. Check the power supply and reset the circuit breaker if necessary.

2. Check the thermostat settings and reset the thermostat if necessary.

3. Clean the heating elements and check for any blockages.

4. Check the fan and air flow and clean any blockages.

5. Contact a professional technician if none of the above steps resolve the issue.

Troubleshooting steps to fix an infrared heater not blowing hot air

In conclusion, there are several common reasons why an infrared heater may not be blowing hot air, including insufficient power supply, malfunctioning thermostat, blocked or dirty heating elements, issues with the fan or air flow, and problems with the heating element itself.

By following our troubleshooting tips and steps, you can identify and resolve these issues to get your infrared heater back up and running.

To maintain the longevity and efficiency of your infrared heater, be sure to clean the heating elements and air intake regularly, and keep the heater away from any potential hazards or obstructions.

With these tips in mind, you can enjoy the cozy warmth of your infrared heater all winter long.

Conclusion and final tips for maintaining an infrared heater

Section 1: Check the Power Source and Settings

When your infrared heater is not blowing hot air, the first thing you should check is the power source and settings. Ensure that the heater is plugged in properly and that the power outlet is functioning. Sometimes, a loose connection or a tripped circuit breaker can disrupt the flow of electricity, resulting in a lack of heat.

Next, inspect the settings on your infrared heater. Make sure it is set to the desired temperature and that the thermostat is functioning correctly. Adjust the settings and give the heater a few minutes to see if it starts blowing hot air.

If the power source and settings are not the issue, let's move on to the next troubleshooting step.

Section 2: Clean the Air Intake and Filter

One common reason why an infrared heater fails to blow hot air is due to a clogged air intake or a dirty filter. Over time, dust, debris, and pet hair can accumulate in these areas, obstructing the flow of air and reducing the heater's efficiency.

To clean the air intake, start by unplugging the heater from the power source. Carefully remove the front grille or cover, which will expose the air intake. Use a soft brush or a vacuum cleaner with a brush attachment to remove any dirt or debris. Be gentle to avoid damaging the heating elements or other internal components.

Next, locate the filter, which is typically located near the air intake. Remove the filter and clean it according to the manufacturer's instructions. If the filter is damaged or excessively dirty, consider replacing it with a new one.

Once the air intake and filter are clean, reassemble the heater and plug it back in. Test if the heater is blowing hot air now.

Section 3: Inspect and Replace Faulty Heating Elements

If your infrared heater is still not blowing hot air after cleaning the air intake and filter, it's time to inspect the heating elements. Faulty or worn-out heating elements can prevent the heater from generating sufficient heat.

To access the heating elements, you may need to remove the rear panel or open the heater's casing. Refer to the manufacturer's instructions for guidance on how to safely access the internal components.

Inspect the heating elements for any signs of damage, such as discoloration or breakage. If you notice any issues, it's best to replace the faulty heating elements with new ones. Contact the manufacturer or a qualified technician to ensure you get the correct replacement parts.

Once the new heating elements are installed, reassemble the heater and test if it's now blowing hot air.

Fingers crossed... is it working now? If so, that's great news!

Still having issues? Reach out to our team via call or text at (855)697-7222 or email us at sales@greenlightheating.com for more help.

Stay Warm!

Shop Patio Heaters:

Previous article Why Choose an Electric Fireplace with Water Vapor

Next article Are Electric Fireplaces Worth The Investment?